| Description |
Patch |
| Noteable clean install. |
When installing Noteable, please follow these
steps to make sure that no previous version interferes with your new
version. 1) Uninstall your old version of Noteable
-Click 'Start', 'Control Panel' and 'Add or Remove Programs'
-Select 'The Noteable Music Flashcards' from the list.
-Click 'Remove'
These important steps are necessary when
upgrading:
4) From your desktop right-click the Start menu and click 'Explore'.
5) From Windows Explorer navigate to 'C:\Program Files\The Noteable
Software Company\' or the location where you installed the
software.
6) Locate and highlight the "Noteable" folder.
7) Press the 'Delete' key on your computer keyboard to remove the old
Noteable files.
Proceed to install your new version of the software.
|
| Upgrade from version 5.01 or higher.
|
1) Uninstall your old version of Noteable
-Click 'Start', 'Control Panel' and 'Add or Remove Programs'
-Select 'The Noteable Music Flashcards' from the list.
-Click 'Remove'
2) Download the latest
version of the software.
3) Click 'Run' and follow the onscreen instructions to complete
the installation.
|
Upgrade from version 4.02 or lower.
Preserve your user profiles.
|
Begin by uninstalling your older version of Noteable:
1) Click 'Start' then 'Control Panel'.
2) From the Control Panel click 'Add or Remove Programs'.
3) Locate 'The Noteable Music Flashcards', select it, then
click 'Remove'.
These important steps are necessary when
upgrading to version 5:
4) From your desktop right-click the Start menu and click 'Explore'.
5) From Windows Explorer navigate to 'C:\Program Files\The Noteable
Software Company\Noteable\' or the location where you installed the
software.
6) Locate and highlight the "Top Ten.dat" file.
7) Press the 'Delete' key on your computer keyboard to remove the
outdated top ten list file.
Proceed to install the latest version:
8) Download the latest version of Noteable.
Download now!
5) Save the file to your desktop.
6) Double-click the downloaded file to begin installation and follow
the on-screen instructions.
|
| I get runtime
error 401 "Can't show non-modal form when modal form is present" or
"Noteable can only load decks with the .dek extension" errors. |
This error was caused when the 'Always use deck' feature checkbox was
chosen, but no deck path was chosen to accompany it. To resolve this
error, uninstall your old version, delete any residual files from the
install location ("C:\Program
Files\The Noteable Music Flashcards\Noteable" by default), and reinstall
the latest version. |
| I get "Error reading setup initialization
file". |
The "Error reading setup initialization file" error you have encountered
appears when your computer has trouble reading the download file. To
avoid this error try choosing to "Save" the file to your disk when
downloading, instead of choosing "Run". Also, erasing temporary files on
your computer may resolve this error.
To resolve this error: First try downloading again. You also might
try downloading at a neighbor's or the library, burning to a CDR and
transporting the file to your location.
Also, you may try downloading from our download hosts,
www.download.com, or
www.tucows.com. Search for
"Noteable".
1) Uninstall any existing version of Noteable.
3) When the "File Download" dialog box appears, click the "Save" button.
4) Click "Desktop" on the left of the "Save as" dialog box.
5) Right click the white area of the "Save as" dialog box and choose
"New" -- "Folder" to create a new folder.
6) Type in the name "Noteable Temp" for the new folder.
7) Double-click the folder to open it.
8) Click "Save" to save the download file of the latest version of
Noteable into your newly created folder.
The file should begin downloading. Make sure all 11.4 Mb of the file
download properly. You can check the file size by right-clicking the
file and choosing "Properties".
When the download has completed:
1) Minimize all open windows to show your desktop.
2) A folder called "Noteable Temp" should appear. Double-click "Noteable
Temp" to open the folder.
3) A file with the latest copy of Noteable called "Noteable###.exe" where
### is the version number should appear.
4) Double-click "Noteable###.exe" to begin the installation of Noteable.
Follow the onscreen installation instructions.
After installation, you can erase the folder "Noteable Temp" from your
desktop.
If the error you encountered persists, you can try erasing any temporary
files that windows stores in temp folders. This is in no way harmful to
your computer and in most cases is helpful.
To erase files stored in temporary folders in Windows XP:
1) Click "Start" "Control Panel" "Perfomance and Maintenance" "Free up
space on your hard disk".
2) Choose drive "C:\". This is chosen by default.
3) From the "Disk Cleanup" window, you can check every box, but at the
very least check "Downloaded Program Files" and "Temporary Internet
Files".
4) Click "OK" to begin erasing temporary files.
Then try reinstalling Noteable.
|
| 1) The
'Keyboard' play mode requests that I enter a Bb when it should be Db and
vice versa.
|
This error has been
fixed in version 3.04+. If using a lower version, please upgrade
now. Upgrade using the instructions below.
Please note: This is a CRITICAL UPDATE
that must be addressed for proper learning. |
| I get the error:
"error reading setup initialization file" upon installation.
|
An attempt to resolve this has been made in
version 5.10. If you still encounter this error in versions 5.10 or
higher, please let us know.
|
| The manual calibration settings don't seem to
save properly.
|
This error has been corrected in versions 5.09
and higher.
|
| I get a missing comctrl32.ocx message.
|
This error has been corrected in versions 5.09
and higher.
|
| I don't see the notes at all but do see tons of
ledger lines!
|
This was a mistake in version 5.06.
Please upgrade to version 5.07 or higher.
|
| When I install on Windows XP and then try to
run the program from another Windows XP user profile I get a path access
error.
|
This problem has been resolved in the latest
version. Upgrade to the latest version.
|
| My shortcut doesn't work after I unlock the
software.
|
Restart your computer to repair the link.
This problem has been resolved in versions 5.05 and higher.
|
| I get a Runtime Error.
|
It is possible there is a conflict between your
newer version and an older version of Noteable.
To remedy this you will have to completely remove Noteable.
First uninstall your current version of Noteable using instructions 1-4
listed in the row immediately above this row. Then:
1) From your desktop click 'Explore'
2) Navigate to 'C:\Program Files\'
3) Locate and highlight 'The Noteable Software Company'
4) Click 'Delete' to completely remove Noteable. Warning:
Doing this WILL erase old user profiles and session statistics.
Now, install the latest version.
|
| The user progress graph links all open the
latest session statistics file, not the file number they represent.
|
This error occurred in versions 5.01 and 5.02
and has been fixed in version 5.03. Upgrade to the latest version. |
| The user progress graph malfunctions and
freezes the program after it exceeds thirty sessions.
|
This error occurred in versions 5.01 and 5.02
and has been fixed in version 5.03. Upgrade to the latest version. |
| I get a runtime error 76 path access error when
running version 5.01
|
This error has been fixed in versions 5.02 and
higher. Upgrade to the latest version. |
| I get a runtime error 372 when loading Noteable.
|
This error has been fixed in versions 4.01 and
higher. Upgrade to the latest version. |
| My detailed statistics graphs sometimes
disappear.
|
This error has been fixed in versions 4.01 and
higher. Upgrade to the latest version. |
| Refresh view doesn't do anything on the Stats
page when the detailed statistics graphs disappear.
|
This error has been fixed in versions 4.01 and
higher. Upgrade to the latest version. |
| Sometimes my Statistics page show weird stuff
or says that session #0 is loaded.
|
This error has been fixed in versions 4.01 and
higher. Upgrade to the latest version. |
| When I click the 'Skip' cheat over and over, it
locks up the whole program and exits.
|
This error has been fixed in versions 4.01 and
higher. Upgrade to the latest version. |
| When I switch between decks the counting of the
sessions gets off.
|
This error has been fixed in versions 4.01 and
higher. Upgrade to the latest version. |
| A message box appears every time I try to
respond using my midi interface.
|
This error has been fixed in versions 4.01 and
higher. Upgrade to the latest version. |
| Require Pitch Accuracy does not save when I
want it to.
|
This error has been fixed in versions 4.01 and
higher. Upgrade to the latest version. |
|
The Progress Report gives me tons of errors about missing or damaged
files every time I load it.
|
This error exists only in versions 3.0-3.01.
Please follow the instructions at the top of this page to upgrade to the
latest version of Noteable. |
|
When Noteable shows me a Bass clef A, I can click F and it counts it as
correct.
|
This error is only present in versions 3.0 - 3.01 and has
been resolved in versions 3.02 and later. Please follow the
instructions at the top of this page to upgrade to the latest version of
Noteable. |
|
The note positioning is off. As appear as Bs, Cs as Ds etc.
|
This is a calibration issue. Since version
3.02, Noteable has included a manual calibration tool that can remedy this
error. Please follow the instructions at the top of this page to
upgrade to the latest version of Noteable. |
I cannot change the clefs view on the statistics page. I click the
button, but nothing happens.
|
This is a small bug in version 3.00 that has been repaired
in version 3.02 and above. Please follow the instructions at the top
of this page to upgrade to the latest version of Noteable. |
